Advanced Engineering coil cleaners: Now more super than ever

  The world's leading coil cleaners have just got even better. Advanced's new formulas have given products like EnviroCoil and CondenCide amazing new abilities to protect nature and combat grime.

Now, whether you choose great value concentrate or handy RTU spray, their new powers will have you cleaning coils and killing germs faster than a speeding bullet...

Now you can work faster, safer and kinder... Just look for the pink label to try our new super-powered coil cleaners. More...

Remove and replace illegal refrigerants correctly, with the original flushing solvent

It's 2010 and virgin R22 refrigerant (Chlorodifluoromethane) is now illegal for use. In the months and years to come, thousands of systems using this obsolete HCFC will need to be modernised or even replaced completely - creating a welcome wave of work for the industry.

Some of these systems can be retrofitted with 'drop-in' refrigerants, substances with properties similar to R22, to make the transition to compliance. However this method requires a complete oil change, removing older mineral oil and replacing with newer synthetic grades.

Many clients could also make the decision to future-proof themselves with an entirely new system. With the price of copper skyrocketing, most technicians will understandably look to re-use the existing R22 pipework. However, even fully evacuated systems are often still full of contaminants. Notably oil, which will stick to pipe walls, collect in low points and will almost certainly be saturated with latent refrigerant.

For both these options, only a complete system flush will prepare pipework for modern, legal refrigerants. Advanced Engineering has published an article weighing up the benefits and potential problems involved in system flushing.

Advanced Engineering EndoFlush has been trusted by UK service engineers for over a decade, as the only product to completely and thoroughly flush copper tubing.

NEW - AC Pro F-Gas Labels  

With F-Gas laws now in effect, Advanced Engineering are committed to making compliance as simple as possible for ACR engineers. With this in mind Advanced Engineering have developed new AC Pro F-Gas labels.

Supplied in packs of 60, the labels allow technicians to comply with recent legislation on stationary ACR and heat pump equipment - Specifically the aspects of F-Gas regarding refrigerant tracking and leak checking.

The first label in the pack shows the leak check history for the particular piece of refrigeration equipment. The other label provides users the space to display the type and amount of refrigerant contained within the system.

The F-Gas labels are weather proof and supplied with a free marker pen.

A new product - and a whole new way of thinking about coil cleaning.

Most industry experts agree on the importance of cleaning air conditioning coils; it's an essential part of maintenance. But how long that cleanliness lasts - and the job facing the engineer at the next service visit - varies hugely according to the occupants of the building and the cleaning protocol followed.

In particularly grimy or germ-laden conditions, it's not uncommon to come back to an unpleasant job and complaints about foul smells from the system.

To overcome this problem from occurring between service visits, Advanced Engineering have developed Guardian : a spray-on protective layer that prevents mould or bacteria re-growing on air conditioning and refrigeration coils for up to six months.

Guardian adds a brief, third element to the standard coil cleaning procedure. In short, the mantra should be: "Clean - Kill - Protect":

• Clean the coil chemically,
• Kill any germs with a good disinfectant, and
• Protect the coil until the next visit.

Protecting the system takes just a few minutes - and could make all the difference to air quality, hygiene and future maintenance work.